Digital IR 24-Channel Receiver

April 29, 2016 – 01:44 pm

The Digital IR 24-Channel Receiver shall be capable of receiving on eight (8) different carrier frequencies; 2.3, 3.0, 3.6, 4.3, 5.0, 5.6, 6.3 and 7.0 MHz and shall be compliant with IEC 61603-7 and IEC 60914 standards. When measured in a specified IR system the receiver shall have a weighted SNR of 80 dB (A) or better, THD at 1kHz shall be less than 0.05% and an audio frequency response of 20 Hz to 20 kHz, (- 3dB) in Perfect Quality mode. The receiver shall have a wide reception angle of up to 270°. The receiver shall accept stereo earphones with a standard 3.5 mm (0.14) connector. The receiver shall have an OLED display indicating channel number, channel language, reception status, volume level and battery status. The receiver shall operate for 20 hours its rechargeable Li-ion battery. The receiver will automatically go to standby mode to conserve battery life when headphone jack is removed or when the IR signal is not present for more than one minute. The LR-DIR-6 Digital IR 6-Channel Receiver is specified.


IOGEAR IOGEAR GW3DHDKIT Wireless 3D Digital Kit with Full HD 1080P and 5.1 Channel Digital Audio
Personal Computer (IOGEAR)
  • Wireless HD audio/video streaming up to 100 feet* away through standard home walls
  • 2 HDTV set-up: share your HD content in a second location at the same time
  • Wireless HD in Full 1080p and 5.1 channel digital audio with 3D support
  • Hang your TV above the fireplace or on the wall without wires
  • Keep home theater electronic devices neatly out-of-sight
Infitary Digital ATSC HD TV Receiver Converter Tuner Box for Analog TV with Recording PVR Function HDMI YPbPr RCA Coaxial Composite Output / USB Input USA
Home Theater (Infitary)
  • •USB 2.0 for PVR,TIMESHIFT,software upgrade and media files playback,•Video output resolution: 480i/576i/480p/576p/720p/1080i/1080P
  • •Converts digital broadcast to your analog TV,•By remote control to choose the RF 3/4 ch output
  • •Support teletext/subtitle/muti-language,•Powerful and highly effective 7-day EPG function
  • Note: If you would like to avoid the Scrambled Channels, please go to the main page and open the CHANNEL SEARCH, and choose the ANTENNA POWER, changing from ON to...
  • There is a protective membrane on the surface. You can peel it off while using at your choice
IP TDA7492P 50W+50W CSR8635 2 x 50 Watt Dual Channel Amplifier Wireless Digital Bluetooth 4.0 Audio Receiver Digital Amplifier Board
Speakers (IP)
  • Power: 2.1 interface 8 ~ 24V DC power supply.
  • Audio input: stereo input various versions of the Bluetooth connection.
  • Using CSR8635 Bluetooth chip, Bluetooth V4.0, high software compatibility.
  • TDA7492 digital amplifier chip, designed to optimize the circuit layout, the sound quality is very good, big power.
  • DIP switches can be adjusted directly after the amp gain more respect and better promote greater damping horn.
SMAKN SMAKN® Wireless Digital Bluetooth 4.0 Audio Receiver Amplifier Board TDA7492P 50W+50W
  • 100% Brand New and High Quality .
  • Power :2.1 inferince 8-24V DC power supply .
  • Audio input : Stereo input various verisions of the bluetooth connection,using CSR8635 Bluetooth chip,Bluetooth V4.0,high software compatibility .
  • Output Impedance :8 ohms Best (4,6,8,16 ohms impedance can diver speaker)
  • Output Power :Add pre-5532 output foot (powered 25V ,6-ohm impedance output 2*50W ,8 ohm impedance output 2*40W dual-channel)
Wilton Aluminium 30 W RMS Two Channel Digital Audio Amplifier Receiver (Wilton DT10)
CE (Wilton)
  • Compact size makes this amplifier great for projects and DIY audio applications
  • 3.5 mm jack allows easy connection to iPods, smart phones, and mp3 players
  • Aluminium enclosure that is lightweight, yet sturdy, and acts as a heat sink
  • Digital amplifier chip provides efficient, powerful sound.
  • Economical but tremendous performance

Related posts:

  1. Digital Satellite TV receiver
  2. Digital Satellite receivers
  3. Digital broadcast receiver
  4. Digital HDTV receiver