DISH Wally HD Satellite Receiver Tech Specs
Size & Weight
- Height: 1.6″
- Width: 10.41″
- Depth: 8.11″
Features & Benefits
- 110 volt
- Infrared remote control included
- HDMI (HD) video output
- RCA composite (SD) video output
- Over-the-air input
- Tuner module: 8PSK
- DRAM memory: 1 GB
- Flash memory: 8 GB
- Processor speed: 5000 DMIPS
In the Box
- DISH Wally HD Satellite Receiver
- Remote Control with 2 AA Batteries
- 6 ft A/V Cable
- 8 ft HDMI Cable
- Detachable Power Cable
Warranty & Support
- Warranty: 1 Year From Date of Activation
DISH ViP211z HDTV Single Tuner Satellite Receiver Tech Specs
- Height: 2.0”
- Width: 12.9″
- Depth: 8.9″
- Single-tuner Satellite Receiver
- Energy Star Certified
- HD Technology
- DVR Ready
- Supports DISH Pay-as-you-go Programming
- Compatible with Winegard Over-the-air Antennas
- Local Channels Included on DISH Programming Guide
DISH MT2 OTA Module
Features
- An MT2 Over-the-Air (OTA) Module to connect your over-the-air (OTA) antenna directly to your ViP222k or ViP722k DVR satellite receiver
- View local, digital, over-the-air channels directly through your satellite receiver by integrating the OTA channels into your Program Guide.
- An OTA antenna must be installed to use the Module.
- A satellite signal and a DISH programming subscription is required to operate the OTA module.
Setup
- Locate the cover on the left side of the back panel on your DISH Network receiver. Using a Phillips head screwdriver remove the two screws attaching the cover to the receiver. You can dispose of the cover, but you will need the screws for the next step.
- Carefully slide the Over-The-Air Module into the module port, making sure the labeling on the module is right-side up. Attach the module using the two screws that were removed in the previous step.
Source: www.winegard.com
Related posts:
